Wire mesh droplet separator
Droplet separators are liquid or aerosol separators for a variety of usage areas and can be delivered with and without housing.
Design examples
Advantages in the application
The different areas of use have specific requirements in form and performance of the droplet separator. Our droplet separators, individually designed to your specifications, reach high separation degrees up to max 99.9% with low pressure drop < 0.25 mbar.
The wire mesh droplet separators are resistant to highly corrosive media. Deliverable wire thickness is, depending on the material, 0.12 mm to 0.5 mm. STRIKO offers a large selection of material in various material combinations, if necessary including support grids, adjusted for your special application.
Application examples
- A/C and exhaust systems
- vaporiser and tension release systems
- vacuum and compressed air systems
- ocean water desalination systems
- absorbtion and distillation systems
- steam boilers
- gas washers
- oil and emulsion fog separators
- coalescence separators
Models
type | wire mesh material | density of wire mesh [kg/m³] | free volume [%] | specific surface [m²/m³] |
۹۱۴۵-SS-0,14/0,28 | stainless steels like 1.4301, 1.4571, 1.4404, 1.4541, Hastelloy®, Monel® and others | ۱۴۵ | ۹۸,۱ | ۲۶۵ |
۹۱۹۲-SS-0,14/0,28 | ۱۹۲ | ۹۷,۵ | ۳۵۰ | |
۹۲۴۰-SS-0,14/0,28 | ۲۴۰ | ۹۶,۹ | ۴۳۴ | |
۹۸۰-ETFE-0,27 | Ethylene- Tetrafluorethylene | ۸۰ | ۹۵,۴ | ۶۸۰ |
۹۸۰-PP-0,40 | Polypropylene | ۸۰ | ۹۱,۲ | ۸۸۰ |
more wire mesh specifications and materials on demand |