Motor Starter with Thermal Relay Atex & IECEx MOTREX SERIES
This Ex motor magnetic starter (hazardous areas) has been designed to guarantee the correct operation and the protection of electric motors in high explosion risk zone.
It’s used to control the electric motor switching on and switching off, besides to protect it against overloads thanks to the thermal relay.
The device has some components: Internal components (Contactor & Thermal relay) and Control components ( Double butto)
The Ex motor starter components, are protected inside of an ATEX & IECEx enclosure, made with sstainless steel AISI 304L.
This Ex motor magnetic starter has been designed to guarantee the correct operation and the protection of electric motors in high explosion risk zone.
It’s used to control the electric motor switching on and switching off, besides to protect it against overloads thanks to the thermal relay.
The device has some components:
•Internal components:
Contactor: allows or doesn’t allow the current to go through the circuit.
Thermal relay: switches off the circuit when the current consumed by motor is higher than the current allowed, avoiding this way the motor coil get burned.
•On the other hand, the control components, it has a double button on the cover, which function is switch on the motor with ON position (1) and switch off the motor with OFF position (0).
The Ex motor starter components, are protected inside of an ATEX & IECEx enclosure, made with sstainless steel AISI 304L. This enclosure has a specific design, being antirust, waterproof and with IP66 protection. It has a protection “Ex e” and “Ex d”, being possible to use it in zones with high explosion risk outdoor and rust.