Indicators

Model X45-100 Indicators

The Model X45-100 indicator (seen at bottom of picture) has an engraved nameplate size of 1.43 inches x 2.12 inches.

Model Attributes:

Names plates available in amber, blue, green, red and white
۱۱۵ Vac system illuminated by two 3-watt lamps
Other voltages available with use of standard S6 lamps

Model R100 Pilot Lamp Indicators

This indicator (seen on top right of picture) provides an excellent power-on indication or alarm status.

Model Attributes:

Standard voltage: 115 Vac or 125 Vdc
Other voltages available with use of S6 lamps
Red, green, blue, amber or white lenses
Supplied with gaskets to meet NEMA ۱۲ standards on panel face

X18 Indicator Models

Models X18-100 (top middle of picture) and X18-200 (top left of picture) Compact Indicators are full voltage and have dual lamp indicators and without the need of resistors or transformers on 115 Vac services. Both models are suitable for group mounting either vertically or horizontally.

Model Attributes:

Lenses available in 5 colors
Lens surfaces may be engraved
Wire terminals are combination of screw type. solderless tabs
X18-200 uses two individually wired lenses in one unit

Model X18-300

The Model X18-300 (not shown in picture) is a full voltage, single lamp indicator without the requirement of resistors or transformers on 115 Vac services. It is suitable for group mounting either vertically or horizontally.

Model Attributes:

Wire terminals are combination of screw type. solderless tabs
X18-200 uses two individually wired lenses in one unit

Lamp Box Indicators

Models LB1, LB2, LB3 and LB4 are single cabinet module indicators based on the popular LB Series.

Nameplate size:

LB1: ۲٫۷۵” (۶٫۹۹ cm) high x 3.00” (۷٫۶۰ cm) wide. Two 6-watt lamps per window.
LB2: ۱٫۴” (۳٫۵۶ cm) high x 3.0” (۷٫۶۲ cm) wide. Two 3-watt lamps per window.
LB3: .۸۶” (۲٫۱۸ cm) high x 3.0” (۷٫۶۲ cm) wide. Two 3-watt lamps per window.
LB4: ۱٫۴” (۳٫۵۶ cm) high x 1.4” (۳٫۵۶ cm) wide. One 3-watt lamp pre window.

Note: ۲۴, ۴۸, and 120 Vac or Vdc lamps available.

Model X1D3

Small but mighty. The very first Ronan product, Tri-Colored indicators combine craftsmanship with convenience to be quickly and easily applied to your specific needs such as production testing, process instrumentation, control panels, alarm indicators, graphic displays and more.

The Model X1D3 Tri-Color Indicator Lights measure 2-7/16 inches long and 1 inch in diameter. This indicator has acrylic lens and is visible from panel sides up to 180 degrees.

Model Attributes:

Engrave-able acrylic lens
Available in three to five standard colors
Completely enclosed and dustproof
Accept soldered, taper pin or screw connections
CSA Approved